GE Signa LX Service Manual Procedures

GE Signa LX Service Manual Procedures by MRIPETCTSOURCE provided for field service engineers and imaging professionals. This page provides MRI system overview, theory of operations, technical specifications and replacement procedures. Before continuing, read disclaimer below.

This page is updated as new content is updated. Check back often for new addition to the GE Signa LX service manual procedures resource page.

GE Signa LX Technical Specifications

How To Check MRI Liquid Helium Levels

GE Signa LX Theory of Operation

Signa LX Replacement Procedures

The latest replacement procedures for the GE 9x MRI platform. Updated daily, requests are always welcome.

Systems Cabinet Replacement Procedures

CPU Board Replacement Procedure

This section outlines the procedure for replacing the CPU Board, located in the TPS Chassis. Start by removing the old CPU Board. The steps are outlined below.

CPU Board Replacement Procedure (Signa LX)

  1. Remove Old CPU Board

    Remove front cover from system cabinet and turn off the Main circuit breaker, CB1. Loosen the two front panel screws. Remove the CPU Assembly from the ISE/TPS Chassis

  2. Verify Board Setup

    See the tables below for jumper, switch, and LED information.

  3. Install Replacement CPU Board

    Install CPU Board into ISE/TPS Chassis and tighten the two front panel screws. Then, turn on the main circuit breaker, CB1. Install systems cabinet front cover.

  4. Perform TPS Reset

    Finally, perform TPS reset if software is running. Power the system back on, if system has been shut down.

Jumper Positioning Chart
LED Information

Medcam AP Board Replacement

Coming Soon!

VME Board Replacement

Coming Soon!

Bit3 Board Replacement (TPS VME IF Board)

RF Cabinet Replacement Procedures

RF Amplifier Replacement

Coming Soon!

SSM Replacement (System Support Module)

Coming Soon!

Gradient Cabinet Replacement Procedures

Gradient Amplifier Replacement

Coming Soon!

GP Replacement

Coming Soon!

Gradient Control Board Replacement

Coming Soon!

TAC Cabinet Replacements (Twinspeed)

Gradient switch replacement

Coming Soon!

Blower replacement

Coming Soon!

Conclusion

Additional Resources

The MRIPETCTSOURCE YouTube channel is a great resource. We publish videos regularly, so make sure to subscribe to stay up to date on the latest radiology resources. Thank you for your support!

Read more on Larry’s author page.

Latest Articles

The information provided by MRIPETCTSOURCE (“we,” “us,” or “our”) on https://www.medicalimagingsource.com (the “Site”) is for general informational purposes only. All information on the Site is provided in good faith, however we make no representation or warranty of any kind, express or implied, regarding the accuracy, adequacy, validity, reliability, availability, or completeness of any information on the Site. UNDER NO CIRCUMSTANCE SHALL WE HAVE ANY LIABILITY TO YOU FOR ANY LOSS OR DAMAGE OF ANY KIND INCURRED AS A RESULT OF THE USE OF THE SITE OR RELIANCE ON ANY INFORMATION PROVIDED ON THE SITE. YOUR USE OF THE SITE AND YOUR RELIANCE ON ANY INFORMATION ON THE SITE IS SOLELY AT YOUR OWN RISK.

Amazon and the Amazon logo are trademarks of Amazon.com, Inc. or its affiliates.

Disclaimer: This website is not affiliated with, endorsed by, or sponsored by GE Healthcare. GE, GE Healthcare, and all product names and logos — including those related to MRI, CT, and PET systems — are registered trademarks of General Electric Company. All product references are for informational and educational purposes only.