How To Shut Down GE CT Scanner

Step-by-step guide to shut down GE CT scanner. This page is part of our GE CT operator manual resources and GE CT service manual resources.

Table of Contents

How To Shut Down GE CT

For optimal performance, GE recommends performing a shut down and start up every 24 hours.

1. Click the shut down icon

Click on the red shut down icon. It is located on the upper left corner of the right side monitor.

2. Select “Shutdown” from the pop-up window.

The pop-up window contains three options: Logout User, Restart, and Shutdown. In this case, select the Shutdown option.

3. Click “OK”.

This will initiate the GE CT shutdown procedure. Allow up to 5 minutes for system to completely shut down.

4. Wait for “System Halted” message to appear.

This is a critical step. Allow system to completely power down before proceeding.

5. Power off CT console.

Once “System Halted” message appears at the bottom of the screen, wait 5 seconds, then power down the console vie the GOC power switch.

Join the Medical Imaging Source Community!

Subscribe To Our Newsletter To Stay Up To Date With The Latest News, Exclusive Offers, And Giveaways!

The information provided by MRIPETCTSOURCE (“we,” “us,” or “our”) on https://www.medicalimagingsource.com (the “Site”) is for general informational purposes only. All information on the Site is provided in good faith, however we make no representation or warranty of any kind, express or implied, regarding the accuracy, adequacy, validity, reliability, availability, or completeness of any information on the Site. UNDER NO CIRCUMSTANCE SHALL WE HAVE ANY LIABILITY TO YOU FOR ANY LOSS OR DAMAGE OF ANY KIND INCURRED AS A RESULT OF THE USE OF THE SITE OR RELIANCE ON ANY INFORMATION PROVIDED ON THE SITE. YOUR USE OF THE SITE AND YOUR RELIANCE ON ANY INFORMATION ON THE SITE IS SOLELY AT YOUR OWN RISK.